Underwater Load Shackles-LS01

Short Description:

Send email to us

Product Detail

Product Tags

Product Description

The Subsea Shackle is a High Strength Subsea rated Load Cell manufactured with a Stainless Steel Load Pin. The Subsea Shackle is designed for monitoring tensile loads below seawater and is pressure tested to 300 Bar. The load cell is manufactured to withstand a though environment. The electronics provide power supply regulation, reverse polarity and over voltage protection..

◎Ranges from 3 to 500 Ton;

◎Integrated 2-wire signal amplifier, 4-20mA;

◎Robust design in stainless steel;

◎Designed for Harsh Environments;

◎Designed to be compatible with existing standards;

◎Easy to install and maintain;

The electronics are molded and encapsulated inside the load cell, proven to be the best solution for EMC, potential leakage and long lifetime performance.

Applications

◎Subsea Cable recovery/repair;

◎Subsea vehicle lifting;

◎Wave generator mooring/tethering;

◎Subsea Cable Laying;

◎Offshore wind cable installations;

◎Bollard Pull and Certification;

Specifications

Capacity:	3t~500t
Safety Overload:	150% of rated load
Protection Class:	IP68
Bridge Impedance:	350ohm
Power Supply:	5-10V
Combined Error(Non-linearity+Hysteresis):	1 to 2%
Operating Temperature:	-25℃ to +80℃
Storage Temperature:	-55℃ to +125℃
Temperature Influence on zero:	±0.02%K
Temperature Influence on Sensitivity:	±0.02%K

Dimension: (Unit:mm)

Cap.	Max.Proof Load(Ton)	Normal Size'A'	Inside Length'B'	Inside Width'C'	Bolt Dia. 'D'	Unit Weight (kg)
3	4.2	25	85	43	28	3
6	8	25	85	43	28	3
10	14	32	95	51	35	6
17	23	38	125	60	41	10
25	34	45	150	74	51	15
35	47	50	170	83	57	22
50	67	65	200	105	70	40
75	100	75	230	127	83	60
100	134	89	270	146	95	100
120	150	90	290	154	95	130
150	180	104	330	155	108	170
200	320	152	559	184	121	215
300	480	172	683	213	152	364
500	800	184	813	210	178	520